/
English
page_banner

News

  • Jacking Oil Filter DQ6803CA20H1.5C: What Engineers Need to Know Before Reinstallation

    The jacking oil filter element DQ6803CA20H1.5C sits at the outlet of the turbine jacking oil pump — a position that makes it more consequential than it might appear on a parts list. Get the installation wrong, and you are not just looking at a small leak. You risk unbuilt system pressure, contami...
    Read more

  • The DQ600QW100HC Pre Filter Element: Protecting Your Oil Purifier Pump

    Turbine oil must stay clean. If you work around steam turbines, yo know the small auxiliary machines have their own separate oil systems. These small systems often use a dedicated Oil purification device to keep the oil in good shape. Inside these devices, several filters work together. The DQ600...
    Read more

  • Keeping EH Oil Clean with the HQ25.016Z Primary Filter

    High-pressure fluid systems in power plants have a really tough life. The fire-resistant fluid—usually called EH oil—runs through turbines under huge heat and pressure for thousands of hours. Because of this, the oil doesn’t stay pure forever. It starts to pick up tiny bits of metal from pa...
    Read more

  • Watching Your Machine Speed with the SZCB-01-A3-B1-C3 Magnetoresistive Speed Sensor

    Big machines like steam turbines or power generators need to be watched all the time. You have to know how fast the shaft is spinning to keep everything safe. The SZCB-01-A3-B1-C3 magnetoresistive speed sensor is a tool made for this exact job. It is a simple, tough piece of hardware that helps y...
    Read more

  • Using the ZFDT-V-V Flame Amplifier for Boiler Safety

    Operating a big boiler in a power plant is a tough job. You have to manage huge amounts of heat and keep the fuel levels just right. One of the most important things is knowing if the burner is actually on. The ZFDT-V-V Flame amplifier is the device that does this job. It takes the small signals ...
    Read more

  • The NPDF-Q21FD3 Hand Operated Device: Your Final Defense for Critical Turbine Valves

    If you work in a power plant, you know the Distributed Control System (DCS) is the brain of the whole operation. It calculates everything and keeps the steam turbine running smooth. But even the best digital systems can have a bad day. Sometimes a card fails or a network gets clogged up. When the...
    Read more

  • The QBJ-3C/Q Speed Impactor Monitor: Keeping Your Turbine Safe with Proper Wiring

    Watching the speed of a steam turbine isn’t just a basic chore. It is actually the last thing standing between a safe machine and a total wreck. The QBJ-3C/Q Speed Impactor Monitor is a smart little device that does two big jobs at once. It shows the live speed of the shaft and it also watc...
    Read more

  • Keeping Your GFD470-130 Cooling Fan Running and Your Transformer Safe

    Running a power system usually means you spend a lot of time watching the heat. If you have a Dry-Type Transformer, the GFD470-130 Cross-Flow Cooling Fan is basically your first line of defense against things getting too hot. This model is made to push air right through the transformer coils, whi...
    Read more

  • How to Set Up the WT0112-A50-B00-C01 Axial Displacement Sensor Properly

    Inside a steam or water turbine, the thrust bearing is a part you have to watch closely. If the rotor moves too much along its axis, it can hit the stationary parts, and that usually ends in a total wreck. The WT0112-A50-B00-C01 Axial Displacement Sensor is the main tool used to stop this from ha...
    Read more

  • How the SDJ-3L/G Vibration Monitor Keeps Your Feed Pumps Safe

    In a power plant, boiler feed pumps are basically the heart of the whole water cycle. These machines spin fast, so even a tiny bit of mechanical trouble can turn into a huge disaster quickly. The SDJ-3L/G Vibration monitor is a standard tool used to watch these pumps, along with fans and coal mil...
    Read more

  • A Field Guide to the WZPM2-001S Temperature Sensor for Fan Bearing Protection

    Monitoring the temperature of motor bearings and bushes is one of the most basic but essential tasks in a power plant. If a bearing in an induced draft fan or a primary air fan starts to overheat, the window for action is usually very small. The WZPM2-001S Temperature sensor is built specifically...
    Read more

  • Wind Speed Sensor YF6-4: A Practical Guide for Power Plant Wind and Air Flow Monitoring

    Monitoring air movement in a power plant is never a clean or easy task. Whether you are looking at the cooling tower outlet or the coal handling system, the environment is constantly trying to wear down your equipment. The Wind Speed Sensor YF6-4 is a common choice for these areas because it is b...
    Read more
<< < Previous 3456789 Next > >> Page 6 / 162
Hit enter to search or ESC to close