/
English
page_banner

Oil Pump

  • DC Vertical lubricating oil pump 125LY-23-4

    DC Vertical lubricating oil pump 125LY-23-4

    DC Vertical lubricating oil pump 125LY-23-4 is used to transport turbine oil and various fluid lubricating oils with lubricating functions. It is mainly composed of machine base, bearing chamber, connecting pipe, volute, shaft, impeller, and other components. Before assembling the oil pump, burring and repeatedly clean all parts and components, and confirm that the cleanliness meets the requirements before assembling. It is suitable for supplying normal temperature turbine oil to lubricating systems such as 15-1000MW steam turbine generator units, gas turbine generator units, and power turbines.
    inquirydetail
  • 25CCY14-190B Jacking oil axial piston pump

    25CCY14-190B Jacking oil axial piston pump

    Jacking oil axial piston pump 25CCY14-190B is a swash plate axial piston pump with oil distribution plate, rotating cylinder and variable head. The pump adopts the optimal oil film thickness design of hydrostatic balance, so that the cylinder block and oil distribution plate, sliding shoe and variable head operate under pure liquid friction. It has the advantages of simple structure, small volume, low noise, high efficiency, long service life and self-priming ability. Axial piston pump has a variety of variable situations to meet the requirements of users. It is widely used in machine tool forging, metallurgy, engineering, mining, shipbuilding and other machinery and other hydraulic transmission systems.
    inquirydetail
  • F3-V10-1S6S-1C20 DEH system EH oil circulating pump

    F3-V10-1S6S-1C20 DEH system EH oil circulating pump

    F3-V10-1S6S-1C20 circulating pump is used in DEH fuel-resistant oil system. The system is equipped with two main oil pumps, one circulating pump and one regeneration oil pump. Considering the stability of the system and the special properties of the working medium, the system adopts a plunger variable pump and an elastic sleeve pin coupling. The connection between the pump and the motor adopts the flange sleeve connection, which is convenient for the maintenance of the pump and the motor.
    inquirydetail
  • Oil Transfer Gear Pump 2CY-45/9-1A

    Oil Transfer Gear Pump 2CY-45/9-1A

    The 2CY-45/9-1A oil transfer gear pump (hereinafter called as the pump) is used to transfer various oil media with lubricity, temperature of not more than 60℃ and viscosity of 74x10-6m2/s below. After modification, it may transfer oil media with temperature of not more than 250℃. It is not suitable for the liquid with high sulfur ingredient, causticity, hard particle or fiber, high volatility, or low flash point.
    inquirydetail
  • HSN series three-screw pump

    HSN series three-screw pump

    HSN series three-screw pump is kind of displacement type low pressure rotor pump with favorable suction capacity. It is applicable to convey various liquid mediums which have lubricating property and do not contain impurities like solid particles, including fuel oil, hydraulic oil, machine oil, steam turbine oil and heavy oil. Viscosity scope of 3~760 mmP2P/s, conveying pressure ≤4.0Mpa, medium temperature ≤150℃.
    inquirydetail
Hit enter to search or ESC to close