Solenoid Valve

  • AST solenoid valve coil Z6206052

    AST solenoid valve coil Z6206052

    The solenoid valve coil Z6206052 is a plug-in type and is used in conjunction with the valve core. Thread connected oil manifold blocks play a corresponding role. Used for emergency trip systems of steam turbines, where the trip parameters of the turbine control the closure of the inlet valve or speed control valve.
  • AST/OPC solenoid valve coil 300AA00086A

    AST/OPC solenoid valve coil 300AA00086A

    The AST/OPC solenoid valve coil 300AA00086A can be equipped with an emergency trip solenoid valve, which is an emergency stop device, also known as a safety valve or emergency shut-off valve. Its main function is to quickly cut off the power supply or medium flow in case of danger or emergency, in order to protect the safety of equipment and personnel. Emergency trip solenoid valves are generally controlled by electrical or pneumatic signals, which have the characteristics of fast response speed and high reliability. In power plants, emergency trip solenoid valves are important safety protection devices that require regular inspection and maintenance to ensure their normal operation and reliability.
  • 22FDA-F5T-W220R-20LBO cone valve type plug solenoid valve

    22FDA-F5T-W220R-20LBO cone valve type plug solenoid valve

    Solenoid valve 22FDA-F5T-W220R-20/LBO is a two-way AC hydraulic control slide valve with light. It is a plug-in solenoid directional valve of cone valve type. It usually plays the role of on-off, pressure maintaining and unloading in industrial equipment. The internal structure of the solenoid valve is direct acting(φ2) diameter and pilot type(φ6) two options. The solenoid valve has the advantages of compact structure, large flow, small pressure loss, no leakage and fast reversing speed. It is widely used in industrial equipment to ensure the safe operation of the equipment.
  • 23D-63B steam turbine turning solenoid valve

    23D-63B steam turbine turning solenoid valve

    Turning solenoid valve 23D-63B is designed for turbine steering control. Turning gear is a driving device that drives the shaft system to rotate before and after the steam turbine generator unit is started and stopped. The turning gear is installed on the rear bearing box cover between the turbine and the generator. When it is necessary to rotate, first pull out the safety pin, push the handle and hand turn the motor coupling until the meshing gear is fully meshed with the rotating gear. When the handle is pushed to the working position, the contact of the travel switch is closed and the steering power supply is connected. After the motor is started at full speed, it drives the turbine rotor to rotate.