page_banner

Water Filter

  • Industrial water filter KLS-100I plant Stator cooling water system filter element

    Industrial water filter KLS-100I plant Stator cooling water system filter element

    The main function of stator cooling water filter element KLS-100I is to filter impurities and pollutants in stator cooling water and protect the normal operation of stator and cooling system. In equipment such as generators, the stator is an important component, and its cooling water needs to be filtered through a filter element to ensure that impurities such as particles, sand, and rust in the cooling water do not cause damage to the stator, and can also extend the service life of the stator cooling system.
    Brand: YOYIK
  • Generator Stator Cooling Water Filter SGLQ-600A

    Generator Stator Cooling Water Filter SGLQ-600A

    Regular maintenance of the generator stator cooling water filter SGLQ-600A is essential to ensure that it continues to function effectively. This includes periodic cleaning and replacement of filter elements, as well as monitoring of pressure drop across the filter to identify any signs of clogging. In summary, a generator stator cooling water filter is a critical component in a power generation system that helps to protect the stator from damage and maintain the efficiency of the generator.
  • SL-1250 Generator stator cooling water filter element

    SL-1250 Generator stator cooling water filter element

    The generator stator cooling water filter element SL-12/50 is installed in stator cooling water system’s filter. The liquid flowing into the filter from the inlet passes through the vertically arranged melt blown filter element, the impurities in the fluid are adsorbed on the surface of the filter element, the clean liquid flows out of the space inside the filter element, and then flows into the system from the outlet of the filter to ensure the cleanliness of the system fluid.
  • WFF-125-1 Generator stator cooling water filter element

    WFF-125-1 Generator stator cooling water filter element

    WFF-125-1 Generator stator cooling water filter element is installed in the matching filter MSL-125 of the turbine generator 600MW unit. It is the filter element of the stator cooling water system in the generator hydrogen oil-water system. It’s used to remove more than 5% of the water carried by the treated make-up water or constant cooling water when passing through the filter through the microfiltration filtration device μ M impurities. Micron precision remains unchanged for a long time, because the wound matrix always maintains the same size, which can only be adjusted by changing the quality and physical characteristics of the filter medium inserted. The filter element fully meets the requirements of fiber length processing filter medium, so that the medium fiber can span at least three frames near the outer diameter, and the closer it is to the inner diameter, the more. Combined with the control of filter medium quality and bridging, all filter elements have accurate, consistent and stable precision.
  • generator stator cooling water filter element KLS-125T/20

    generator stator cooling water filter element KLS-125T/20

    The generator stator cooling water filter element KLS-125T/20 is used to filter impurities in the generator stator cooling water system. The stator cooling water system can continuously flow the cooling water (pure water) through the stator coil, so as to take away the heat caused by the loss of the generator stator coil, so as to ensure that the temperature rise (temperature) of the stator coil meets the relevant requirements of the generator operation. In order to ensure the cleanness of the cooling water pipe and prevent blockage, the generator stator cooling water filter element KLS-125T/20 is usually used to filter water to ensure clean water quality.