page_banner

Filter

  • generator stator cooling water filter element KLS-125T/20

    generator stator cooling water filter element KLS-125T/20

    The generator stator cooling water filter element KLS-125T/20 is used to filter impurities in the generator stator cooling water system. The stator cooling water system can continuously flow the cooling water (pure water) through the stator coil, so as to take away the heat caused by the loss of the generator stator coil, so as to ensure that the temperature rise (temperature) of the stator coil meets the relevant requirements of the generator operation. In order to ensure the cleanness of the cooling water pipe and prevent blockage, the generator stator cooling water filter element KLS-125T/20 is usually used to filter water to ensure clean water quality.
  • Jacking Oil System Backwash Filter ZCL-I-450

    Jacking Oil System Backwash Filter ZCL-I-450

    Jacking Oil System Backwash Filter ZCL-I-450 is widely used in turbine oil system and auxiliary lubrication system, as well as thin oil circulating lubrication system of large equipment in metallurgy, mining, petrochemical, light industry, etc. In addition, the device is used as a temporary filtering device in the oil circulation stage of the steam turbine unit, which can improve the flushing quality of the oil system, shorten the oil circulation time, ensure that the unit is put into operation in advance, and create considerable social and economic benefits.
  • WFF-125-1 Generator stator cooling water filter element

    WFF-125-1 Generator stator cooling water filter element

    WFF-125-1 Generator stator cooling water filter element is installed in the matching filter MSL-125 of the turbine generator 600MW unit. It is the filter element of the stator cooling water system in the generator hydrogen oil-water system. It’s used to remove more than 5% of the water carried by the treated make-up water or constant cooling water when passing through the filter through the microfiltration filtration device μ M impurities. Micron precision remains unchanged for a long time, because the wound matrix always maintains the same size, which can only be adjusted by changing the quality and physical characteristics of the filter medium inserted. The filter element fully meets the requirements of fiber length processing filter medium, so that the medium fiber can span at least three frames near the outer diameter, and the closer it is to the inner diameter, the more. Combined with the control of filter medium quality and bridging, all filter elements have accurate, consistent and stable precision.
  • SL-1250 Generator stator cooling water filter element

    SL-1250 Generator stator cooling water filter element

    The generator stator cooling water filter element SL-12/50 is installed in stator cooling water system’s filter. The liquid flowing into the filter from the inlet passes through the vertically arranged melt blown filter element, the impurities in the fluid are adsorbed on the surface of the filter element, the clean liquid flows out of the space inside the filter element, and then flows into the system from the outlet of the filter to ensure the cleanliness of the system fluid.
  • LX-FF14020041XR Compressor air filter element

    LX-FF14020041XR Compressor air filter element

    LX-FF14020041XR compressor air filter element for removal dryer inlet impurity. The filter element uses borosilicate nano-glass fiber as the main filter material, which can filter out the oil-water aerosol particles in the compressed air, effectively prolong the service life of the adsorbent, and has a relatively high dust removal and filtering accuracy and a certain dehumidification and drying capacity.
  • BR110 air filter Compressed air impurity filtration

    BR110 air filter Compressed air impurity filtration

    Air filter BR110, the compressed air from the air source contains excessive water vapor and oil droplets, as well as solid impurities, such as rust, sand, pipe sealants, etc., which will damage the piston sealing ring and block the components on the small vent holes, shorten the service life of components or make them ineffective. The function of the air filter is to separate the liquid water and liquid oil droplets in the compressed air, and filter out the dust and solid impurities in the air, but cannot remove the gaseous water and oil.
  • SH006 EH oil regeneration cellulose precision filter

    SH006 EH oil regeneration cellulose precision filter

    SH006 EH oil regeneration cellulose precision filter is made of stainless steel frame, stainless steel end cap, imported filter material and imported filler. It is specially developed for the anti-fuel oil system of steam turbines. It can effectively filter out particulate impurities and colloidal substances in anti-fuel oil and maintain EH anti-fuel oil. level of cleanliness. Together with the diatomite filter element, it constitutes the secondary filtration system of the regeneration device. It is an important EH oil physical and chemical index adjustment device and an important hydraulic auxiliary equipment to ensure the normal operation of the EH oil system. The precision filter SH006 is suitable for intercepting impurities in the regeneration device of the anti-fuel oil system of the steam turbine of the power plant.
  • OF3-08-3RV-10 EH oil main tank circulating pump suction filter

    OF3-08-3RV-10 EH oil main tank circulating pump suction filter

    Filter element OF3-08-3RV-10 is used for circulating pump. The circulating oil filtering and cooling circuit is used to filter and cool the fire-resistant oil. It is mainly composed of a fire-resistant oil circulating pump, an oil filter and two coolers. When the oil cooler and the oil filter are put into operation for a long time, the oil will return to the oil tank.
  • DP201EA01V-F actuator inlet flushing oil filter element

    DP201EA01V-F actuator inlet flushing oil filter element

    DP201EA01V/-F filter element is the steam turbine actuator working filter element. It is installed in the oil motor of the anti-fuel oil system. It is used to filter out the solid particles and colloidal substances in the anti-fuel oil, and effectively control the pollution degree of the anti-fuel oil. Filter the anti-fuel oil entering the servo valve to protect the servo valve.
  • 30-150-207 regeneration device diatomite oil filter element

    30-150-207 regeneration device diatomite oil filter element

    Diatomite filter element 30-150-207 is used for acid removal of regeneration device of fire resistant oil system. When the anti-combustion oleic acid value increases, phosphoric acid reacts with the metal powder in diatomite to produce metal soap or metal salt, which endangers the servo valve. It will often block the filter element, grind the valve core after entering the servo valve, increase the internal leakage at first, and discard the servo valve at last. When the metal salt is found in the system, the servo valve will be damaged in batches. Filtration cannot be improved, and oil change is the important way.