-
DJM1615-87 Boiler Water Level Electrode: Why Signal Flicker Happens and How to Isolate the Real Fault Source
The DJM1615-87 is an external-thread electrode rod for electric contact water level gauges installed on boiler drums, high and low pressure heaters, and deaerators. It forms the core sensing element of the level measurement chain — the component that determines, at each discrete measurement point...Read more -
ME5.530.172 Electric Actuator Display Card: Function, Black Screen Diagnosis, and Voltage-Based Fault Isolation
The ME5.530.172 is the local display and control module fitted to motor-operated valve (MOV) electric actuators. It gives operators direct access to valve position feedback, operating parameters, and fault status at the actuator itself — independent of what the DCS is showing in the control room....Read more -
XDH-20C High-Energy Igniter DCS Integration and On-Site Fault Diagnosis
The XDH-20C is a capacitor-discharge high-energy igniter designed for boiler burner ignition systems. It converts a 220V AC supply into a 3000V DC charge stored in a capacitor bank, then releases that energy in a controlled pulse through a semiconductor ignition nozzle at the oil gun tip. When th...Read more -
WRNK2-321 Armored Thermocouple Compression Fitting Installation and Bending Hazards
The WRNK2-321 is a dual-element K-type armored thermocouple with an adjustable compression fitting for threaded process connections. Both thermocouple elements share one sheath but operate independently — giving you a backup reading from the same point without pulling a second assembly through th...Read more -
KQF1500 Generator Gas Leakage Transmitter: Alarm Validation and Multi-Data Diagnosis
The KQF1500 is an online gas leakage detection transmitter for hydrogen-cooled generators, built around thermal conductivity sensing to continuously monitor hydrogen concentration inside the generator casing. It sends a 4–20 mA signal to the DCS and activates relay alarm contacts when concentrati...Read more -
ZKZ-3T Speed Monitor: Creep Detection, and False Alarm Prevention for Hydro Turbine Units
The ZKZ-3T is a multi-purpose speed monitor that combines the functions of a frequency meter, tachometer, speed relay, and speed test instrument in a single panel-mounted device. It is designed for continuous speed monitoring of hydro turbine generator units, providing both digital display and sw...Read more -
Piston Main Oil Pump PVH098R01AD30A250000001001AE010A Early Leak Diagnosis
The PVH098R01AD30A250000001001AE010A is a pressure-compensated variable displacement piston pump used as the main oil pump in steam turbine EH oil systems. It converts motor shaft power into high-pressure fire-resistant oil supply for the turbine’s governing and protection circuits — and un...Read more -
MFB-2.5YC Solenoid Valve Coil: AC Wet-Type Design, Thermal Failure Risks, and Undervoltage Detection
The MFB-2.5YC is an AC 220V wet-type solenoid valve coil designed to drive hydraulic directional solenoid valves in demanding continuous-duty environments. It sees service in steam turbine EH oil control systems, jacking oil circuits, and various hydraulic actuator control branches — applications...Read more -
22FDA-K2T-W110R-20/LBO Steam Turbine Test Solenoid Valve: Online Trip Testing and Valve Activity Verification
The 22FDA-K2T-W110R-20/LBO is a test solenoid valve used in the governing and emergency trip system of steam turbines. Its specific job is to simulate trip conditions while the turbine is under load — not to shut the unit down, but to confirm that the critical valves protecting it are free to mov...Read more -
YSF8-55/130KJTH Oil-Immersed Transformer Pressure Relief Valve: Function, Failure Modes, and Post-Actuation Diagnosis
The YSF8-55/130KJTH is a spring-loaded pressure relief valve fitted to the top of an oil-immersed transformer tank. When internal pressure climbs past a set threshold — from a genuine fault or from conditions that have nothing to do with the transformer’s electrical health — it opens, disch...Read more -
CS941H-16C Steam Trap: Free Float Operation, Iron Fouling, and Fast Fault Detection
The CS941H-16C is a free float steam trap rated for 1.6 MPa service, designed for continuous condensate drainage in boiler and process steam systems. Its operating principle is straightforward — but the failure mode caused by iron particle fouling on the float is one that often goes undetected un...Read more -
HQ25.014Z EH Oil Pump Discharge Filter: Function, Inspection, and Response to Corrosion Contamination
The HQ25.014Z is a 10-micron discharge filter element installed in the pump outlet control block of the EH oil system, used on 600MW generating units. It sits immediately downstream of the main EH oil pump and handles everything the pump puts into the high-pressure circuit — including whatever we...Read more
