Air Valve Manufacturer in China | High-Quality Air Valves
As a China-based manufacturer, I bring you reliable air valve solutions built to meet industrial standards. Whether you need anti-backflow, pressure relief, or regulating valves, my air valve lineup covers aluminum, brass, and stainless steel bodies, with NBR or FKM seals to suit different media. I design for easy installation, compact footprint, and long service life under harsh environments. Our valves feature blow-out proof stems, blow-through protection, adjustable setpoints, and leak-tight performance across a wide range of temperatures. For OEMs and MROs, I offer customizable ports, thread standards, and actuators to match your system. I enforce strict QA with 100% leak and function tests, and I can handle large orders with fast lead times. As a China manufacturer, I understand the needs of global buyers and can provide favorable terms, certificates, and after-sales support. Reach out for samples, price quotes, or a technical discussion about your air valve project.
air valve Service Service Backed by Expertise
Reliable air valve service backed by engineering expertise ensures your projects run smoothly from specification to long-term operation. Our team delivers precision-manufactured valves and tailored control solutions built from corrosion-resistant materials and validated by rigorous testing and industry certifications. Detailed technical documentation, performance verification, and configurable options mean each valve meets unique system requirements while minimizing downtime and lifecycle costs. For global buyers, we offer competitive lead times, flexible order volumes, and coordinated logistics to meet on-site schedules. After-sales support includes spare parts, commissioning guidance, preventative maintenance programs, and warranty coverage to protect your investment and optimize system performance across diverse operating environments.
| Valve Type | Nominal Size (DN / inch) | Pressure Rating (bar / psi) | Flow Coefficient (Cv) | Primary Material & Seals | Common Failure Modes | Typical Diagnostic Checks | Recommended Service Interval | Estimated MTBF (hours) | Repair Complexity | Typical Service Steps | Required Tools | Typical Spare Parts | Notes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Solenoid-actuated 2/2 valve | DN4–DN25 / 1/8"–1" | 0–10 bar / 0–145 psi | Typical 0.05–1.8 (example: 0.6) | Aluminum body, NBR seals | Coil burnout, seal wear, sticking spool | Coil resistance, leakage test, actuation timing | 6–12 months (duty dependent) | ~20,000 | Low–Moderate | Isolate air → de-energize → remove coil → replace seals → bench test | Multimeter, hex keys, pick set, small spanners | Seal kit, coil assembly, spring, armature | Fast response; sensitive to particulate contamination |
| Pilot-operated directional control valve (5/2) | DN6–DN20 / 1/4"–3/4" | 0–8 bar / 0–116 psi | Typical 1.5–4.0 (example: 2.5) | Zinc alloy body, PTFE seals | Pilot leakage, delayed switching, seal extrusion | Pilot pressure check, spool movement, leakage rate | 12 months | ~30,000 | Moderate | Depressurize → remove pilot lines → inspect spool & seals → replace and reassemble → verify switching | Pressure gauge, hand pump, pick tools, torque wrench | Spool seal kit, pilot gasket, return spring | Best performance with clean, dry pilot supply |
| Pressure-reducing (regulator) valve | DN4–DN12 / 1/8"–1/2" | 0.07–10 bar / 1–145 psi | Typical 0.02–0.4 (example: 0.12) | Brass body, Buna-N diaphragm | Diaphragm rupture, seat wear, hysteresis | Outlet stability test, hysteresis check, diaphragm inspection | 24 months | ~50,000 | Moderate | Relieve pressure → remove bonnet → replace diaphragm/seat → calibrate outlet | Calibration gauge, small screwdrivers, spanners | Diaphragm kit, seat washer, adjustment spring | Critical for stable instrument and actuator supply |
| Quick-exhaust valve | DN4–DN25 / 1/8"–1" | 0–10 bar / 0–145 psi | Typical high Cv (example: 3.0) | Aluminum/composite body, Viton or NBR seals | Port blockage, seal wear, sticking disc | Exhaust flow test, response time, port inspection | 12 months | ~40,000 | Low | Depressurize → remove & clean ports → replace discs/O‑rings → verify exhaust performance | Compressed air, cleaning brushes, picks | Disc kit, O-rings, springs | Reduces backpressure for faster actuator return |
| Pneumatic check (non-return) valve | DN4–DN25 / 1/8"–1" | 0–10 bar / 0–145 psi | Typical 0.1–2.0 (example: 0.8) | Stainless steel internals, PTFE seat | Leakage, seat damage, debris blockage | Backflow test, leak rate, seat inspection | 24 months | ~60,000 | Low | Isolate → disassemble → clean bore → replace seat/spring → reassemble and leak test | Leak detector spray, picks, spanners | Seat, spring | Common in safety and sequence circuits |
| Proportional pneumatic pressure control valve | DN6–DN12 / 1/4"–1/2" | 0–10 bar / 0–145 psi | Typical 0.05–1.0 (example: 0.9) | Stainless steel body, EPDM seals | Positioner drift, internal leakage, hysteresis | Position loop tuning, hysteresis test, flow band check | 6–12 months (duty dependent) | ~25,000 | High | Calibrate electronics → replace diaphragm → bench test with flow → tune control loop | Multimeter, flow bench, calibration controller/software, precision gauges | Positioner module, diaphragm kit, control spring | Requires specialized calibration and test equipment |
Related Products
air valve Application Where Innovation Meets 2025
Top Selling Products
- Related Blog
- Reviews
