page_banner

Setting Gas Pressure of Hydraulic Accumulator NXQA.25/31.5

Setting Gas Pressure of Hydraulic Accumulator NXQA.25/31.5

The accumulator NXQA.25/31.5 is a pressure vessel that is an important tool for maintaining system pressure and stability in hydraulic systems. Yoyik suggests that when charging gas into the accumulator, it is necessary to follow the standard process.

Hydraulic Accumulator NXQA.25/31.5

It is necessary to use a standard CQJ type nitrogen charging tool with a pressure gauge on it to ensure that the charging pressure meets the requirements of the accumulator.
CQJ type accumulator Gas charging tool (6)

When inflating, connect one end of the CQJ nitrogen charging tool to the nitrogen cylinder and the other end to the accumulator. First, open the valve nozzle of the nitrogen cylinder and check the pressure inside the cylinder. Then, slowly screw in the handwheel of the nitrogen charging tool by hand and open the one-way valve of the accumulator’s gas nozzle. At this point, the pressure on the pressure gauge begins to decrease, indicating that nitrogen has entered the accumulator until the rated pressure is reached. First exit the handwheel and then close the nitrogen cylinder.

Hydraulic Accumulator NXQA.25/31.5
Generally, an inflation safety valve should be installed on the accumulator component to prevent the nitrogen inside the accumulator from being too high due to the influence of oil pressure. For example, the accumulator NXQA.25/31.5 has an inflation pressure of 20MPA and a system working pressure of 25MPA. When the oil pressure fills the accumulator, it will compress the bladder, and the pressure of the bladder will increase to over 20MPA. At this time, the safety valve will start to release pressure according to the set pressure value.

Hydraulic Accumulator NXQA.25/31.5

Yoyik offers full accessories for the NXQ series accumulator, including:
Nitrogen Charging Kits NXQ-A-1.6/31.5-L-A
Accumulator Type Nxqb-10/20-F-E
Accumulator Type NXQA-B40/31.5L-K
Oil Accumulator Bladder (Plus Seal) NXQ-10/31.5-L-ZD
Nitrogen Bladder Accumulator NXQA-4/315-L
Bladder Type Accumulator NXQA-10/315-L-Y
Accumulator Pre Charge Kit NXQ-F25/10-H
Hydraulic Accumulator Tank NXQB-40/20-L-A
Gas Charging Valve NXQ-A-25/20-L-Y
Low Voltage Accumulator Assembly NXQB-10-F-E
Hydraulic Pressure Accumulator NXQ-AB-40/20-L-A
EH HP Accumulator Bladder NXQ-A-10/20-F-Y
Rubber Bladder For ST High Pressure Accumulator NXQA-40/31.5-L-EH
Hyd Accumulator NXQ-A-16/31.5-L-EH


  • Previous:
  • Next:

  • Post time: Jun-06-2023