The cooling water for the generator stator adopts desalinated water or condensed water, and its water quality requirements are to ensure clean water quality, suitable pH value, low conductivity, and avoid the accumulation of sediment. The filter SG125/0.7 used for stator cooling water must achieve the required effect in order to ensure good water quality.

Cleanliness: The filter element SG125/0.7 needs to keep the stator cooling water clean and free of impurities and solid particles. Impurities and particles may block the cooler or water channel, which is prone to scaling inside the hollow wire, reducing the cooling effect, causing the generator coil to overheat, leading to insulation aging and failure.

PH value: The pH value of cooling water needs to be within an appropriate range, usually between 7 and 9. High or low pH values can lead to metal corrosion, and corrosion products may also deposit in the flow passage of the wire rod, causing local overheating and even local blockage, affecting the safe operation of the generator set.

Conductivity: Cooling water needs to have sufficient insulation performance (i.e. low conductivity) to prevent short circuits in generator coils.

There are different types of filter elements used in power plants. Choose the filter element you need below or contact Yoyik for more information:
Water Machine Filter SWF
5 Gallon Water Filter KLS-100I
10 Micron Filter Cartridge HD221-2F-9
Best Water Filtration System XLS-100
Cotton Wound Filter Cartridge WFF-150-1
High Flow Filtration KLS-50U/280
Ultra Filtration System MSL-125
Best Water Purification System SGLQ-300A
Water Purifier Exchange Offer SGL-125/0.8
Water Filter Parts SWFY4
Hydraulic Oil Tank Filter LS-25-3
Cheapest Water Filter HD429-2F-29
Water Purifier Price SL-12/50
Filter Pp 666 KLS-I
Water Filter Purifier SGLQ-1000A
Melt Blown Cartridge KLS-50T/80
The Best Water Filters 2020 DSG-125/08
5 Gallon Water Filter KLS-65T/80