China Manufacturer of Transfer Pump Vane
From my workshop to your production line, this transfer pump vane is built for reliability in demanding transfer applications. As a China-based Manufacturer, we craft each vane with precision-forged aluminum/stainless steel depending on the model, ensuring long wear life and consistent flow. You’ll appreciate the tight tolerances, balance, and impact resistance that reduce vibration and maintenance. Our transfer pump vane fits standard housings and is tested under real-world conditions, so your uptime remains high. We offer short lead times, competitive MOQ, and flexible customization to match your pump brand and performance needs. Whether you operate in chemical, food, or water transfer, our vane delivers steady prime, minimal axial play, and easy installation. I know how important supplier reliability is, so I back every shipment with quality certificates and responsive aftersales. Choose us as your trusted China Manufacturer for dependable transfer pump vane solutions.
transfer pump vane Is The Best Manufacturers You Can Rely On
Finding a transfer pump vane manufacturer you can rely on starts with proven precision, material expertise, and consistent quality control. Leading suppliers use advanced materials like polyurethane, carbon and reinforced composites, combined with CNC machining and dynamic balance testing to ensure long service life, low wear and tight tolerances. Look for partners who provide clear specifications, sample testing, and compliance with international standards to guarantee compatibility across pumps and industries. For global buyers, dependable manufacturers offer flexible customization, predictable lead times, competitive pricing and responsive technical support. Strong logistics, spare parts availability and after‑sales service minimize downtime and total cost of ownership. Choosing a supplier that balances engineering knowhow, rigorous inspection and fast global delivery makes procurement straightforward and reliable.
| Parameter | Typical Value / Range | Unit / Standard | Notes |
|---|---|---|---|
| Vane material (common) | Hardened carbon steel; martensitic stainless; bronze; PTFE-coated composites | — | Material chosen by fluid compatibility and wear requirements |
| Hardness (typical for steel vanes) | 45–60 | HRC (ASTM E18) | Balance between wear resistance and toughness |
| Tensile strength (hardened steel) | 700–1200 | MPa (ASTM A370) | Depends on heat treatment and alloy |
| Surface treatment | Nitriding, hard chrome plating, PTFE coating, black oxide | — | Improves wear and corrosion resistance |
| Vane thickness (typical) | 1.0–6.0 | mm | Selected for strength and flex characteristics |
| Recommended rotor clearance | 0.05–0.5 | mm | Tighter clearance improves efficiency but raises wear risk |
| Volumetric flow (typical transfer pumps) | 0.5–200 | m³/h | Range covers small to medium industrial transfer applications |
| Operating speed | 500–3600 | rpm | Depends on vane geometry and lubrication |
| Maximum differential pressure | 0.5–16 | bar | Typical vane pumps operate effectively up to ~10–16 bar with design variation |
| Operating temperature range | -20 to 120 (standard); up to 200 (special materials) | °C | High-temp service requires special vanes and seals |
| Viscosity range handled | 10–10,000 | cP (mPa·s) | Very high viscosity fluids reduce flow and increase wear |
| Fluid compatibility | Hydraulic oils, fuel oils, vegetable oils, water-glycol, light solvents (with suitable materials) | — | Strong acids/alkalis require special alloys or coatings |
| Volumetric efficiency (typical) | 80–95 | % | Depends on clearance, wear state, and fluid viscosity |
| Expected service life | 5,000–20,000 | hours | Highly dependent on operating conditions and maintenance |
| Recommended maintenance interval | 500–5,000 | hours | Inspect vanes, seals, clearances, and lubrication |
| Common wear modes | Abrasion, erosion, adhesive wear, thermal softening | — | Contaminants and incompatible fluids accelerate wear |
| Compatible pump types | Sliding-vane rotary pumps, external vane transfer pumps | — | Design specifics vary by pump family |
| Typical seal types | Lip seals for light service; mechanical seals (single/cartridge) for higher pressures | — | Seal choice affects allowable pressure and fluid compatibility |
| Typical material density (examples) | Steel: ~7.8; Bronze: ~8.7 | g/cm³ | Useful for mass/rotor balance calculations |
| Corrosion resistance rating | Moderate (carbon steel) to high (stainless/PTFE-coated) | — | Select stainless or coatings for saline or aggressive fluids |
| Quality & test references | Hardness: ASTM E18; Tensile: ASTM A370; Corrosion testing: ASTM B117; Dimensional inspection: ISO-relevant metrology practices | ||
Related Products
transfer pump vane Delivers Unmatched Quality Manufacturers You Can Rely On
Top Selling Products
- Related Blog
- Reviews
