page_banner

Products

  • Jacking oil pump discharge filter DQ8302GA10H3.5C

    Jacking oil pump discharge filter DQ8302GA10H3.5C

    The filter element DQ8302GA10H3.5C is the outlet filter element of the top shaft oil pump, installed at the outlet of the top shaft oil pump. When the oil passes through the top shaft oil pump, it is filtered to remove impurities, ensuring the cleanliness of the special oil, which is beneficial for protecting the top shaft oil pump from long-term use and reducing maintenance frequency and costs.
    Brand: YOYIK
  • High Temperature cylinder sealing grease MFZ-3

    High Temperature cylinder sealing grease MFZ-3

    MFZ-3 cylinder sealing grease is used for sealing the joint surface of power plants and industrial steam turbine cylinder bodies. It is a single component solvent free 100% solid content, and can be cured immediately upon heating. It does not contain harmful ingredients such as asbestos and halogens, and can withstand high temperatures. Its performance indicators can fully meet the operating requirements of 300MW and below units; It can be used alone or combined with copper asbestos gaskets for high-temperature sealing of other high-temperature furnace pipeline flanges.
    Brand: YOYIK
  • High Temperature steam turbine cylinder sealing grease MFZ-2

    High Temperature steam turbine cylinder sealing grease MFZ-2

    High Temperature steam turbine cylinder sealing grease MFZ-2 is a liquid paste sealant that does not contain asbestos, lead, mercury and other harmful ingredients to human body. It is widely used in fossil-fuel power station and industrial steam turbine body cylinder junction surface sealing, which can resist special high temperature of 600 ℃, main steam pressure of 26MPa, and has good high-pressure performance and adhesion performance. It is an ideal sealing material for steam turbine installation and maintenance in thermal power plant, It can also be used for sealing the flange surface of high-temperature hot furnace pipelines.
    Brand: YOYIK
  • Generator grey insulating varnish 1361

    Generator grey insulating varnish 1361

    Generator grey insulating varnish 1361 is a mixture of insulating paint and fillers, suitable for surface covering of motors and electrical appliances, as well as anti-covering coating of the insulation surface at the end of high-voltage motor stator winding (winding), and spraying insulation on the surface of rotor magnetic poles.
    Brand: YOYIK
  • Turbine generator carbon brush 25.4*38.1*102mm

    Turbine generator carbon brush 25.4*38.1*102mm

    Turbine generator carbon brush 25.4*38.1*102mm is used in motors, with good service life and commutation performance, which can ensure that the brush is not replaced within a repair process, greatly reducing the maintenance workload and cost of the motor, and reducing the motor failure rate. Suitable for motor equipment in various industries such as railway, metallurgical steel rolling, port lifting, mining, petroleum, chemical, power plants, cement, elevators, papermaking, etc.
  • Low Resistance Anti-Corona varnish 130

    Low Resistance Anti-Corona varnish 130

    Varnish 130 is a low resistance anti-corona paint used for anti-corona treatment of high-voltage motor stator coils. It can effectively prevent the occurrence of coil discharge and corona. Low Resistance Anti-Corona varnish 130 is mainly used for brushing and wrapping the anti-corona structure of high-voltage motor stator windings (coils). For example, low resistance anti-corona paint can be applied to the straight section of generator coils. Stir well when using.
    Brand: YOYIK
  • EH oil main pump discharge filter DP1A601EA01V/-F

    EH oil main pump discharge filter DP1A601EA01V/-F

    EH oil main pump discharge filter DP1A601EA01V/-F is installed in the oil circuit of the fire resistant fuel system to filter metal powder and other mechanical impurities worn by various components in the system, keeping the oil circuit clean and extending the service life of the fire resistant fuel system; The low-pressure series filter element also has a bypass valve. When the filter element is not replaced in a timely manner, the bypass valve can automatically open to ensure the normal operation of the system.
    Brand: YOYIK
  • MSV\CV\RCV actuator flushing filter DP3SH302EA01V/F

    MSV\CV\RCV actuator flushing filter DP3SH302EA01V/F

    The MSVCVRCV actuator flushing filter DP3SH302EA01V/F of the hydraulic motor can be installed as a filtering device in the inlet of the hydraulic system, mainly used for filtering the power hydraulic station system of power plants, steel mills, and paper mills. It is used to filter the metal rust in the fire-resistant oil, maintain the pollution level of the fire-resistant oil within the specified range, and ensure the normal operation of the steam turbine to achieve the predetermined efficiency.
    Brand: YOYIK
  • Circulating pump EH oil return filter DR1A401EA03V/-W

    Circulating pump EH oil return filter DR1A401EA03V/-W

    The Circulating pump EH oil return filter DR1A401EA03V/-W is installed in the oil circuit of the hydraulic system to remove metal powder and other mechanical impurities worn by various components in the hydraulic system to keep the oil circuit clean and protect the normal operation of the equipment. When the fluid enters the filter element of the filter, its impurities are blocked, and the clean fluid flows out through the hydraulic oil filter element. This can extend the service life of the hydraulic system.
    Brand: YOYIK
  • Steam turbine EH oil Filter element QTL-63

    Steam turbine EH oil Filter element QTL-63

    The inlet filter element QTL-63 of the EH oil circulation pump is used for the filter. The filter is an indispensable device on the transmission medium pipeline, usually installed at the inlet end of equipment such as pressure reducing valves, relief valves, and constant water level valves. After the treated water passes through the filter cartridge of the filter screen, its impurities are blocked.
    Brand: YOYIK
  • Hydraulic oil filter element SDGLQ-25T-16

    Hydraulic oil filter element SDGLQ-25T-16

    Hydraulic oil filter element SDGLQ-25T-16 is efficient filtering equipment used in fossil-fuel power station and nuclear power plants, which is mainly used to filter hydraulic oil, control impurities and pollutants in the oil, and ensure stable operation and safety of the system. The filter element is made of high-performance filtering materials and advanced production technology. It can meet the filtration needs of power plants under different operating conditions, with a long service life and convenient replacement.
    Brand: YOYIK
  • Recycle pump working filter DP1A401EA03V/-W

    Recycle pump working filter DP1A401EA03V/-W

    As the name suggests, the circulating pump is to recycle and use EH oil, which requires the oil quality to reach at least level 7 when EH oil re-enters. Therefore, we installed the Recycle pump working filter DP1A401EA03V/-W on the return oil filter in the EH oil system, with high filtration accuracy and the ability to filter out small particles in EH oil, providing clean EH oil.
    Brand: YOYIK