Keeping Small Turbines Stable with the LY-100/25W-26 Control Oil Filter

Small steam turbines are the workhorses of many industrial power plants. They drive feed water pumps and fans, and they have to be very precise. This precision comes from the hydraulic oil station. Inside that station, the oil must stay clean. This is where the control oil filter element becomes important. Specifically, the LY-100/25W-26 model handles the oil that adjusts the turbine’s speed and load. If this control oil filter element is not working well, the turbine will not stay stable. It is a simple part, but without a good steam turbine filter element, you will face many expensive repairs.

When the filtration efficiency of an LY-100/25W-26 drops, the oil gets dirty. Most people don’t think about it until something goes wrong. But dirty oil is the start of many problems in the hydraulic station. If you need a reliable control oil filter element, we have the LY-100/25W-26 ready for your next maintenance outage.

Why Oil Cleanliness Drops

A control oil filter element has a specific micron rating. For the LY-100/25W-26, it is designed to catch very small particles. Over time, the filter media gets full. If you don’t change it, the oil begins to bypass the filter or the efficiency just goes down. Small bits of metal, dust, and carbon stay in the oil.

Dirty oil moves through the whole system. Because the adjustment system in a small machine is very sensitive, even a little bit of dirt is bad. This is why the reliability of your steam turbine filter element is so important. If the oil is not clean, the valves will not move the way they are supposed to. This leads to “hunting,” where the turbine speed goes up and down and won’t stay steady.

Faster Wear on Hydraulic Parts

Inside the hydraulic oil station, there are valves and actuators. These parts have very tight metal-on-metal gaps. When particles get past the control oil filter element, they enter these gaps. The particles scratch the surfaces. This is often called abrasive wear.

As the scratching continues, the gaps get bigger. When gaps get bigger, oil leaks internally. This means the pump has to work harder to maintain pressure. It is a cycle that only ends when the parts fail. Using a high-quality control oil filter element like the LY-100/25W-26 stops this scratching before it starts. If you want to avoid replacing expensive valves, you should always keep a fresh steam turbine filter element in your system.

The Problem with High Oil Temperatures

If your hydraulic oil is getting too hot, your control oil filter element might be the reason. Dirty oil creates more friction. When particles rub against the metal walls of the pipes and valves, they generate heat. Also, if the LY-100/25W-26 is clogged, the pump has to push harder. This extra work by the pump turns into heat in the oil.

High heat makes the oil break down faster. It turns the oil into a thick sludge. This sludge then clogs the control oil filter element even more. It is a very bad situation for a small turbine. A stable oil temperature is only possible if the oil is clean and flows easily. Replacing the LY-100/25W-26 control oil filter element on a regular schedule keeps the temperature where it belongs.

Technical Features of the LY-100/25W-26

The LY-100/25W-26 control oil filter element is designed to handle the specific flow rates of a small turbine’s adjustment station. It has enough surface area to catch a lot of dirt without causing a huge drop in pressure.

How Reliability Affects the Adjustment System

The adjustment system needs to be fast. When the grid needs more power or the boiler needs more water, the turbine must react. This reaction depends on the oil pressure being perfect. If the control oil filter element allows dirt into the system, the servo valves can stick.

A sticking valve is a major safety risk. The turbine might not shut down properly during an emergency. Or it might not pick up load when you need it. The reliability of the LY-100/25W-26 control oil filter element is what keeps these valves moving freely. It is the most important part of your preventive maintenance plan. We provide the LY-100/25W-26 to power plants that cannot afford downtime. Our steam turbine filter element products meet all the technical standards for small machine systems.

Maintenance Tips for Control Oil Systems

You should not wait for an alarm to change your control oil filter element. By the time the alarm sounds, the oil is already dirty.

• Check the Gauges: Look at the differential pressure every day. If it starts to climb, the LY-100/25W-26 is doing its job but is getting full.
• Regular Oil Testing: Take a sample of the oil every month. Look for the particle count. If the count is high, your control oil filter element is failing.
• Clean the Housing: When you swap the LY-100/25W-26, wipe out the inside of the filter housing. Don’t leave old dirt at the bottom.
• Stock Spares: Always have at least two LY-100/25W-26 elements in your warehouse. You don’t want to be waiting for a shipment while your turbine is running on dirty oil.

If you are looking for a quote on a bulk order of the control oil filter element, you can contact us today. We ship the LY-100/25W-26 quickly to help you avoid these maintenance delays.

Risks of Poor Quality Filters

There are many companies that make cheap versions of the LY-100/25W-26. These cheap filters often use thin paper or low-quality glue. If the glue fails, the control oil filter element will fall apart inside the housing. Then, the filter material itself becomes a contaminant.

A high-quality control oil filter element uses a metal frame and high-grade fibers that won’t break down in hot oil. The LY-100/25W-26 we supply is built for the long term. It can handle the pressure spikes that happen when the turbine starts up. Don’t risk your system with a cheap steam turbine filter element.

Installing the LY-100/25W-26 Correctly

Installing a control oil filter element is simple, but you have to be careful. First, make sure the system is off and the pressure is gone. Open the housing and remove the old LY-100/25W-26. Check the seals at the bottom. If the O-ring is old, it will leak. Put the new control oil filter element in and make sure it is straight. If it is not straight, oil will go around it instead of through it. Close the housing and tighten the bolts. Always bleed the air out of the housing before you go back to full operation.

If you need a manual or more technical advice on installing the LY-100/25W-26, our team is happy to help. We are experts in the steam turbine filter element field and can guide you through the process.

Why Reliability is the Goal

Every minute your turbine is offline costs money. The control oil filter element is one of the cheapest parts in the whole plant, but it has a huge impact on uptime. By using a genuine LY-100/25W-26, you are making sure the oil stays clean, the wear stays low, and the temperature stays normal.

Our steam turbine filter element solutions are used in small turbines across many industries. We focus on quality because we know how much a turbine trip hurts your production. The LY-100/25W-26 is a key part of that quality.

Do you need to replace your filters now? Don’t wait for the oil to get dirty. Reach out to us for a quote on the LY-100/25W-26. We provide competitive prices and high-quality parts that you can trust.

E-mail: sales@yoyik.com
Tel: +86-838-2226655
Whatsapp: +86-13618105229

Yoyik offers various types of power plants spare parts for steam turbines, generators, boilers as below:
duplex lube oil filter SZ-152*843-PZ
industrial filtering equipment UE319AP20H
hydraulic oil filter system HP0502A10VRP01 servo moter filter
filter manufacturers near me AP3E302-03D10V/-W EH oil actuator working filter
steam turbine filter 0160DN25BN4HC
cartridge stainless steel filter housings HQ25.600.18Z EH oil Cellulose filter
hydraulic oil filtering machine HX-25*10 jacking oil pump discharge filter
hydraulic filter micron rating DP2B01EA01V/-F FILTER SERVO MANIFOLD CV, MSV, RSV, ICV
replaceable filter drier core DP6SH201EA01V/-F BFP EH oil system filter
hydraulic filter manufacturers 0110R020BN3HC
lube oil & filter HC8314FCT39H Oil purifier Circulating filter
stainless steel oil filter ZTJ30.00.07 Hydraulic actuator working filter
hydraulic suction filter assembly DQ25FW25H0.8S BFP double cartridge filter
hydraulic filter efficiency 21FC5121-110×160/10
hydraulic tank filters DQ600KW25H10S Filter element
hydraulic filter placement 21FC1421-160*600/20
strainer filter manufacturer HC9100FRP8Z
high flow filtration system 20um 65t/h
stainless steel filter cartridge AD3E301-04D03V/-W oil tank oil-return filter
best oil filter SH-L22050
hydraulic oil filter housing 01-535-044 DUPLEX OIL FILTER