As the core component of the bladder accumulator A B80/10, the bladder is a wearing part, but it can also be maintained to extend its service life and ensure the normal operation of the accumulator bladder.

Yoyik introduces several methods to maintain the accumulator bladder:

• Check the appearance of the bladder: regularly check the surface of the accumulator bladder for crack, wear, deformation, etc. If there is any abnormality, replace it in time.
• Keep the bladder clean: avoid the accumulator bladder from being stained with oil stain, dust and other impurities, clean the bladder regularly to ensure its surface is clean.
• Check the sealing performance of the bladder: check whether the joint and sealing parts of the bladder are in good condition, and replace or repair the sealing parts in time in case of leakage.
• Regular inflation inspection: conduct regular inflation inspection on the accumulator bladder to ensure that the bladder is not damaged and the air tightness is good.
• Attention to inflation pressure: strictly comply with the inflation pressure regulations to avoid damage to the bladder due to over-inflation.
• Check the connecting parts: ensure that the connecting parts (such as thread and flange) between the accumulator bladder and the hydraulic system are complete and fastened.
• Keep the working medium clean: ensure that the hydraulic oil or working medium entering the accumulator is clean to avoid the damage of the bladder caused by dirt.
• Avoid high temperature and direct sunlight: try to avoid exposing the accumulator bladder to high temperature and direct sunlight to extend the service life of the bladder.
• Regularly check the performance of the bladder: Regularly check the performance of the bladder, and timely analyze and handle in case of performance degradation or other abnormal phenomena.

Yoyik can offer other hydraulic pumps or valves for power plants as below:
servo valve seals PSSV-0890-DF0056
sealing oil float tank float valve BYF-40
globe style check valve LJC100-1.6P
relief valve DB20G-2-L5X/5U/2
accumulator gas charging kit 10 Liter, 200 Bar
Radial Roller Bearing DE NU319EC
oil lubricated vacuum pump 30-WS
Mechanical seal ZU44-45
air side sealing oil pump HSND280-46N
Three Phase Asynchronous Motor 1LE0001-0DB3 2-2AA4-Z-80M
types of solenoid ZD.02.008
use of vacuum pump 30-WSRP
forged steel valves 50LJC-1.6P
replacement solenoid coils CCP115D