Generator Stator Cooling Water Filter MSL-125

Short Description:

The generator stator cooling water filter MSL-125 is a filter element installed in the stator cooling water system of a power plant. The filter element adopts a PP wire wound structure, and the polypropylene melt blown filter element is used as the main support skeleton inside, which has a large amount of dirt and circulation. The filter element has a honeycomb structure with sparse exterior and dense interior, which can effectively remove impurities such as suspended solids, rust, and particles in the fluid. The filter element is lightweight and easy to install and disassemble.

Send email to us

Product Detail

Product features

1. The MSL-125 stator cooling water filter element has good deep filtration effect;

2. This filter element can withstand high pressure and low pressure drop;

3. This filter element can effectively remove suspended solids, particles, rust and other impurities in the flowing liquid, with good filtering effect and long service life.

Operational principle

The generator stator cooling water filter MSL-125 is used in the stator cooling water system to filter out impurities in the stator cooling water and maintain the cleanliness of the stator cooling water to meet the system requirements.

The cooling water system becomes an independent closed loop system. The process of the stator cooling water system is: the water pump absorbs water from the water tank and sends it to the water cooler for cooling. Then, it passes through the MSL-125 generator stator cooling water filter to remove mechanical impurities. After passing through the flow orifice plate, it enters the empty wire in the generator stator bar and the lead stator outlet sleeve in two ways. The cooling water enters from the excitation end, flows out from the steam end, and the outlet water flows back to the water tank, thus circulating.