-
Magneto electric Rotation Speed Sensor ZS-02
In order to facilitate the measurement of the rotational speed of turbo machinery, a speed measuring gear or keyphase is usually installed on the rotor. Magneto electric Rotation Speed Sensor ZS-02 measures the frequency of the speed measuring gear or keyphase and converts the rotational speed signal of the rotating parts of the rotating machinery into a corresponding electric pulse signal, which is used for measuring the rotational speed of electronic equipment. Sensors are available in regular and high resistance versions to meet measurement needs under different operating conditions.
BRAND: YOYIK -
Steam Turbine Magnetic Rotation Speed Sensor SMCB-01-16L
SMCB-01-16L magnetic rotation speed sensor adopts a new SMR element, which is triggered by a steel material permeable magnet. It has the characteristics of wide frequency response (from static to 30KHZ), good stability, and strong anti-interference. There is an amplifying and shaping circuit inside to output a square wave signal with stable amplitude, which can realize long-distance transmission. It can measure rotation speed, displacement, angular displacement measurement and precise positioning of related equipment. The product has high reliability, sturdiness and durability.
BRAND: YOYIK -
KEY PULSES (KEY PHASOR) Rotation Speed Sensor DF6202-005-050-04-00-10-000
Rotation Speed Sensor DF6202-005-050-04-00-10-000 is our new generation of high-performance speed sensor. It has an input frequency range of low to zero speed and up to 25 KHz, which can be used in almost any speed measurement occasions. The installation clearance of the sensor can reach 3.5mm, making the sensor not easy to be damaged by the rotating gear plate, and the installation is extremely convenient. Rotation Speed Sensor DF6202-005-050-04-00-10-000 can work reliably for a long time in harsh environments such as oil, water and steam, with good vibration and impact resistance, no moving parts, non-contact and long service life.
BRAND: YOYIK -
Rotation Speed Sensor probe CS-3
Rotation Speed Sensor probe CS-3 has strong anti-interference performance, the shell is made of stainless steel thread structure, which is easy to install and fix, and the interior is sealed. It can be used in smoke, oil gas, water vapor and other harsh environments. Speed Sensor probe CS-3 is suitable for monitoring and protection of zero speed and reverse rotation of industrial feed water pump, water turbine, compressor and blower.
Brand: YOYIK -
Steam Turbine Rotation Speed Sensor CS-2
CS-2 Rotational Speed Sensor is able to output accurate waves under low rotational speed and low gear speed. With the maximum installation gap of 2.0mm, the CS-2 speed sensor can avoid the probe being damaged by the rotating tooth disc. It is especially suitable for seriously asymmetrical disc. CS-2 Rotational Speed Sensor has stainless steel threaded shell, casting sealed inner structure, and oil resistant and high temperature resistant wire. It can be applied to smoke, oil and gas, water vapor and other harsh environments. The sensor must not be near any magnetic field or strong current conductor, which will interrupt the output signal.
Brand: YOYIK -
Reverse Rotation Speed Sensor CS-3F
The reverse speed sensor CS-3F can be used to detect the positive and negative rotation, rotational speed, linear speed, etc. of gears, racks and axles. The acceleration of the measured body can also be obtained through calculation and processing. The reverse speed sensor CS-3F has good low frequency and high frequency characteristics, and its low frequency can be as low as 0Hz, which can be used for the zero speed measurement of rotating machinery. Since the sensor can give two speed signals with a certain phase difference, it can be used for positive and negative rotation discrimination. The high frequency can be as high as 20 KHz, which can meet the high speed measurement requirements of most industrial fields. -
CS-1 Series Rotational Speed Sensor
CS-1 Rotational Speed Sensor is based on electromagnetic induction principle，outputs frequency signals which are directly proportional to the rotational speed of the rotating machinery. Its outer shell is made of stainless steel screw thread, sealed inside and is heat-resistance. The connection cable is shielded flexible conductor and has strong anti-interference performance. The sensor has large output signal, no need to amplify; has good anti-jamming performance, no need for external power supply; and can be used in smoke, oil, gas, water and other harsh environments. -
Boiler Air Preheater Infrared array probe HSDS-30/T
The Infrared array probe HSDS-30/T uses infrared signals to monitor the surface temperature of heating components. When the measured temperature is 150-200 ℃, it triggers an alarm and takes necessary measures to nip the fire alarm in the bud before reaching the metal ignition temperature, thereby protecting the safety of boiler equipment and personnel.
Brand: YOYIK -
DF6101 Steam turbine magnetic rotation speed sensor
DF6101 series magnetoelectric rotational speed sensor (also known as magnetoresistive type or variable-air type) is a commonly used speed sensor with high cost performance and wide usage. It can be used in the field of low cost consumer products and high precision speed measurement and control of aircraft engines. -
CWY-DO Steam Turbine Eddy Current Sensor
CWY-DO series Eddy current sensor adopts a new design, which makes the new probe have longer service life, more stable and more reliable output. In addition, the new special coaxial cable, gold-plated connector and high-temperature insulator on the connector all make the new probe stronger and work better under difficult conditions. The joint of CWY-DO eddy current sensor and extension cable uses rubber head, so as to avoid the erosion of external dust and oil.
The selection of cable length on CWY-DO probe is very flexible. You can choose the length of 0.5, 1.0, 1.5 and 2.0m, or the length of 5m and 9m integrated with probe and cable. The probe can be British or metric. At the same time, the reverse mounted probe installed on the inner sleeve of the probe housing assembly can also be supplied.
/
