-
MSV\CV\RCV actuator flushing filter DP3SH302EA01V/F
The MSVCVRCV actuator flushing filter DP3SH302EA01V/F of the hydraulic motor can be installed as a filtering device in the inlet of the hydraulic system, mainly used for filtering the power hydraulic station system of power plants, steel mills, and paper mills. It is used to filter the metal rust in the fire-resistant oil, maintain the pollution level of the fire-resistant oil within the specified range, and ensure the normal operation of the steam turbine to achieve the predetermined efficiency.
Brand: YOYIK
-
Circulating pump EH oil return filter DR1A401EA03V/-W
The Circulating pump EH oil return filter DR1A401EA03V/-W is installed in the oil circuit of the hydraulic system to remove metal powder and other mechanical impurities worn by various components in the hydraulic system to keep the oil circuit clean and protect the normal operation of the equipment. When the fluid enters the filter element of the filter, its impurities are blocked, and the clean fluid flows out through the hydraulic oil filter element. This can extend the service life of the hydraulic system.
Brand: YOYIK
-
Steam turbine EH oil Filter element QTL-63
The inlet filter element QTL-63 of the EH oil circulation pump is used for the filter. The filter is an indispensable device on the transmission medium pipeline, usually installed at the inlet end of equipment such as pressure reducing valves, relief valves, and constant water level valves. After the treated water passes through the filter cartridge of the filter screen, its impurities are blocked.
Brand: YOYIK
-
Hydraulic oil filter element SDGLQ-25T-16
Hydraulic oil filter element SDGLQ-25T-16 is efficient filtering equipment used in fossil-fuel power station and nuclear power plants, which is mainly used to filter hydraulic oil, control impurities and pollutants in the oil, and ensure stable operation and safety of the system. The filter element is made of high-performance filtering materials and advanced production technology. It can meet the filtration needs of power plants under different operating conditions, with a long service life and convenient replacement.
Brand: YOYIK
-
Recycle pump working filter DP1A401EA03V/-W
As the name suggests, the circulating pump is to recycle and use EH oil, which requires the oil quality to reach at least level 7 when EH oil re-enters. Therefore, we installed the Recycle pump working filter DP1A401EA03V/-W on the return oil filter in the EH oil system, with high filtration accuracy and the ability to filter out small particles in EH oil, providing clean EH oil.
Brand: YOYIK
-
EH Circulating Junction oil filter QTL-250
The EH Circulating Junction oil filter QTL-250 is used at the inlet of the turbine fire resistant oil (EH oil) pump to filter the phosphate oil in the fire resistant oil system and maintain the cleanliness of the phosphate oil to meet on-site usage requirements. The main purpose is to remove metal powder and other mechanical impurities from the worn components of the fire-resistant fuel system. Clean oil can reduce equipment wear and prolong the service life of the equipment.
Brand: YOYIK
-
Recycle pump washing oil filter DP1A401EA01V/-F
The Recycle pump washing oil filter DP1A401EA01V/-F is installed on the return oil pipeline of the EH oil system, located in a position where the pollution level of the control system is very effective. It can filter out small impurities in the EH oil with high filtration accuracy and belongs to the fine filter element. The use of filter element DP1A401EA01V/-F can extend the service life of hydraulic equipment. The use of stainless steel material has good filtration performance, wear resistance, high temperature resistance, pressure resistance, and a longer service life.
Brand: YOYIK
-
Industrial filtration Lube oil system Lube filter LY-15/25W
The Lube filter LY-15/25W is installed in the oil filter of the lubricating oil system, and the oil filter is installed at the outlet of the pump, made of stainless steel. The filter element LY-15/25W is used for filtering the lubricating oil of steam turbines and is an effective measure to ensure the quality of lubricating oil. To ensure the operation of the unit, two filters are configured, one for operation and one for backup. -
Generator Stator Cooling Water Filter MSL-125
The generator stator cooling water filter MSL-125 is a filter element installed in the stator cooling water system of a power plant. The filter element adopts a PP wire wound structure, and the polypropylene melt blown filter element is used as the main support skeleton inside, which has a large amount of dirt and circulation. The filter element has a honeycomb structure with sparse exterior and dense interior, which can effectively remove impurities such as suspended solids, rust, and particles in the fluid. The filter element is lightweight and easy to install and disassemble. -
EH oil regeneration filter ZX-80
The EH oil regeneration filter ZX-80 is often used in conjunction with the TX-80 water removal filter element, JLX-45 fine filter element, and WU-63 coarse filter element. It is used to reduce the acid value of EH fire-resistant fuel in power plants, improve conductivity and impurities in the oil, purify the oil quality, improve the efficiency of fire-resistant fuel use, protect the hydraulic system, and prevent pipeline corrosion caused by high acid value of fire-resistant fuel.
Brand: YOYIK
-
EH oil regeneration Alumina Filter 30-150-219
The alumina filter 30-150-219 is one of NUGENT filter elements represented by Dongfang Yoyik. The absorbent cartridge containing Activated alumina, molecular sieve or other special media is particularly suitable for neutralizing acid and maintaining the quality of various synthetic oil-based hydraulic fluids. Activated alumina is a porous, highly dispersed solid material with a large surface area. Its microporous surface has the characteristics required by catalysis, such as adsorption performance, surface activity, excellent thermal stability, etc.
-
APH Fan oil cooler GLC3-41.6
The APH Fan oil cooler GLC3-4/1.6 is used in thin oil lubrication systems and hydraulic systems in industrial sectors such as metallurgy, mining, cement, electricity, light industry, food, chemical industry, papermaking, etc., to cool the lubricating oil and hydraulic oil in the system. The cooler cools the hot working oil to the required temperature in the thin oil lubrication device, hydraulic station, and oil pressure equipment.
Brand: YOYIK
/
