Company News

Reasons of Stop Valve WJ10F-1.6P Can Be Used for Generator Hydrogen Cooling System
by admin on 23-10-24
The bellows stop valve WJ10F-1.6P achieves high sealing performance and zero leakage through its special dual sealing structure. This is also one of the reasons why it can be used in the hydrogen cooling system of generators. The hydrogen cooling system of the generator is a special cooling syst...
Read more
Application of EH oil return filter DR405EA03V/-F
by admin on 23-10-20
EH oil return filter DR405EA03V/-F can be installed at the outlet end of the conveying pipeline to keep the oil entering the oil pump clean and effectively prevent wear and tear of the oil pump. It can be used to filter out unknown solids in the oil, protect the normal operation of the valve and ...
Read more
How Does the Air Inlet Valve QXF-5 Charge Nitrogen for Accumulators?
by admin on 23-10-19
The QXF-5 charging valve is a one-way valve used to charge nitrogen into an accumulator. This valve is installed at the gas inlet of the bladder type accumulator, and is inflated with the help of an inflation tool. After inflation is completed, the valve can close itself after removing the inflat...
Read more
Introducing the generator surface Sealant HEC750-2
by admin on 23-10-19
The surface Sealant HEC750-2 is applied to the generator end cover, mainly to form a sealing layer between the generator end cover and the casing to prevent hydrogen leakage. During the operation of the generator, under high temperature and high pressure environments, chemical reactions may occur...
Read more
Deyang YOYIK produces high-quality surface Sealant DE82-2
by admin on 23-10-18
Surface Sealant DE82-2 is a sealant used on the generator end, with excellent performance and reliability. It undergoes strict process control and quality discipline to ensure excellent performance under various working conditions. The excellent characteristics of surface Sealant DE82-2: 1. Good...
Read more
Room temperature Heat conduction insulating box potting adhesive J0912
by admin on 23-10-17
Application Room temperature Heat conduction insulating box potting adhesive J0912 is suitable for pouring insulation boxes at the end of generator electronic winding bars, with the characteristics of thermal conductivity and elasticity. Technical indicators 1. Appearance: Uniform, without forei...
Read more
How does the Reducer M02225.0BGCC1D1.5A Affect Vacuum Pump Working?
by admin on 23-10-16
The gearbox reducer M02225.0BGCC1D1.5A is a mechanical device used for reducing speed and transmitting power in vacuum pump units 30-WS. It can reduce the speed of the high-speed rotating input shaft to the desired output shaft speed. In the generator vacuum pump set, a gearbox is installed at th...
Read more
Excellent performance of RTV epoxy adhesive J0793
by admin on 23-10-16
RTV epoxy adhesive J0793 has excellent mechanical and electrical properties, low curing temperature, energy and labor saving, high heat resistance, and long storage period. Suitable for impregnating the binding rope (tape) fixed at the end of the stator winding of large power generators and impre...
Read more
Difference Between Servo Valve FRD.WJA5.021 And Regular Servo Valves
by admin on 23-10-13
There are some differences in design and application between the servo valve FRD.WJA5.021 used in the DEH control system of power plant steam turbines and other servo valves. DEH control system is a digital electro-hydraulic control system used for speed regulation and load control of steam turbi...
Read more
How does the Shut-off Valve HGPCV-02-B30 Control Turbine Pressure?
by admin on 23-10-13
The shut-off valve HGPCV-02-B30 is a pressure control valve used in the EH oil system of power plants, with automatic control function. It can control the oil on/off according to the set action pressure value, prevent oil from emptying, and ensure stable oil pressure on the main pipe. This produc...
Read more
Servo Valve 072-1202-10 Need to Use Clean Turbine EH Oil
by admin on 23-10-13
The flow control servo valve 072-1202-10 is applied to the high-pressure regulating valve of the power plant steam turbine, the intermediate pressure regulating valve, and the main steam valve. It is a key component in the DEH system, used to accurately control the flow rate in the hydraulic syst...
Read more
Attention Required for Using Pressure Regulating Valve KC50P-97
by admin on 23-10-12
The pressure regulating valve KC50P-97 used in the sealing oil system of steam turbine generators is a valve used to control the oil hydrogen differential pressure. It is usually used to maintain the oil hydrogen differential pressure within the set range, ensuring the normal operation of the sea...
Read more