The shut-off solenoid valve F3RG06D330 in the fire-resistant oil system of the steam turbine is an automatic control element used to quickly cut off the oil inlet of the actuator, so as to ensure the safe operation of the system. At the same time, it can connect the safety oil circuit when closing the hydraulic servo-motor, so as to quickly close the steam valve and avoid possible dangers.

Shut-off solenoid valve F3RG06D330 plays a critical protective role in the steam turbine system. Here we introduce some precautions when installing the shutdown solenoid valve, and hope it is helpful to you.

• Position selection: the shut-off solenoid valve shall be installed at a position easy for operation and observation, so as to facilitate routine maintenance and quick operation in case of emergency.
• Installation of valve body: when installing the valve body, ensure that the connection between the valve body and the pipeline is firm without leakage. Meanwhile, the valve body shall be installed vertically to avoid untight closing of the valve or wear of the valve stem.
• Power line connection: the power line of the solenoid valve shall be reliably connected to avoid cable damage or loose connector. At the same time, ensure that the power voltage of the solenoid valve is stable so as not to affect its normal operation.
• Oil circuit connection: when connecting the oil circuit, ensure that the oil pipe is clean and free from distortion, damage or leakage. In addition, ensure that the filter in the oil circuit is correctly installed to prevent impurities from entering the solenoid valve and damaging internal parts.
• Debugging: after installation, the shutdown solenoid valve shall be debugged to ensure that it can act accurately without clamping stagnation in the opening and closing state.
• Maintenance: in daily operation, check the working state of the solenoid valve regularly, handle in time in case of any abnormality, and replace the sealing parts and damaged parts regularly to ensure that the valve is always in good working state.
• Safety protection: In order to ensure normal operation of the shut-off solenoid valve in emergency, it shall be interlocked with the safety protection device (such as pressure switch, temperature sensor, etc.) to realize automatic cut-off of the oil circuit. At the same time, the action performance of solenoid valve shall be tested regularly to ensure that it can quickly cut off the oil circuit in case of failure.

Yoyik can offer other hydraulic pumps or valves for power plants as below:
Ddv Valve For Turbine Hpcv G761-3027B
Pneumatically Operated Angle Seat Globe Valve Gemu 514 Pn25 Dn25 Material 1.4408
Check Valve 50Mm 216C65
Axial Piston Fixed Pump Hpu-V100/A
Globe Valve Pn16 Q23Jd-L10
Valve: Dome; Inline P30331D-00
Bfpt Tearing Foil D7A031230A
Pneumatically Operated Angle Seat Globe Valve Gemu 514 Pn25 Dn40 Material 1.4408
Boiler Stop Check Valve 15Fwj1.6P
Msv Active Solenoid Valve Coil Ccp230M