page_banner

Application of Oil Filter QF1600KM2510BS in Power Plants

Application of Oil Filter QF1600KM2510BS in Power Plants

The dual filter element QF1600KM2510BS is used in situations that require high cleanliness of lubricating oil. It can achieve online cleaning or replacement of filter elements, reduce downtime, and ensure continuous oil filtration.

Oil Filter QF1600KM2510BS in Power Plants

The use of the oil filter QF1600KM2510BS in the lubricating oil system of power plant steam turbines usually depends on the specific requirements and design of the system. Here are some common usage locations:

1. Main lubricating oil pump outlet: The filter QF1600KM2510BS can be installed at the outlet of the main lubricating oil pump to further clean the lubricating oil conveyed from the oil pump. This can ensure that the oil has a high level of cleanliness before entering the turbine, reducing wear on internal parts of the turbine.

2. Lubricating oil inlet for important bearings: Some key bearings in the steam turbine require particularly high-quality lubricating oil to ensure their normal operation. Installing filter element QF1600KM2510BS at the lubricating oil inlet of these bearings can help remove small particles and impurities from the oil, thereby extending the service life of the bearings.
Oil Filter QF1600KM2510BS in Power Plants
3. Before and after the oil cooler or oil heater: In the lubricating oil system, the oil cooler or oil heater is used to maintain the temperature of the lubricating oil within an appropriate range. The dual filter element QF1600KM2510BS can be installed before and after these devices to ensure that the oil maintains a high level of cleanliness even after cooling or heating.

4. Before and after the oil separator or oil filter: The oil separator or oil filter is used to separate the moisture and gas in the lubricating oil to maintain the quality of the oil. Installing dual filters before and after these devices helps to further remove impurities from the oil and improve its quality.

Oil Filter QF1600KM2510BS in Power Plants

There are other different filter elements used in power plants as below. Contact Yoyik for more types and details.
Filter element DP602EA03V
filter element HF1802A03HVP01
Lubricant filter P163567
hydraulic oil station filter RFL-110*5H
Oil resistant rubber seal Generator QF-60-2
Filter HC0293SEE5
oil filter Q2U-H25*30S
Coalescence Filter Z1202846
filter element FAX(NX)-63*1
cellulose filter JCAJ010
Stator outlet assembly Generator QFSN-600-2
Oil supply pump oil filter SDGLQ-45T-100K
jacking device double cartridge filter SRLF-850*25P
filter element FAX(NX)-250*1
oil-return filter HTGY300B.6


  • Previous:
  • Next:

  • Post time: Feb-23-2024