The feedwater pump steam turbine is a common power equipment in modern industry, and its reliability and efficiency are crucial for the entire production process. To ensure the normal operation of the steam turbine, a comprehensive oil supply system and auxiliary oil supply equipment are needed to ensure that the main body bearings of the small machine and the driven feedwater pump bearings are properly lubricated during startup, shutdown, normal operation, and emergency conditions. In this process, lube filter 2-5685-0484-99 plays a vital role.

The functions of lube filter 2-5685-0484-99:

Lube filter 2-5685-0484-99 is a critical component in the lube oil system of feedwater pumps. Its main function is to filter impurities and particles from the oil, ensuring the cleanliness of the lubricating oil, thus extending the service life of the bearings and reducing the likelihood of failures. High-quality lubricating oil can effectively reduce friction and wear, improving the operational efficiency and reliability of the steam turbine.

Replacement and Cleaning of lube filter 2-5685-0484-99:

During the operation of the feedwater pump steam turbine, Filter Element 2-5685-0484-99 will gradually accumulate impurities. When the differential pressure of the filter oil exceeds the set limit or the quality of the filtered oil does not meet the requirements, it is necessary to replace or clean the filter element.

Steps for Replacing lube filter 2-5685-0484-99:

1. Preparation: Before replacing the filter element, ensure that all tools and the replacement lube filter 2-5685-0484-99 are ready, and notify the control room to maintain clear communication throughout the process.

2. Shutdown Operation: Depending on the specific circumstances, it may be necessary to shut down the steam turbine to ensure a safe filter element replacement.

3. Oil Pressure Monitoring: During the replacement, closely monitor the oil pressure to ensure it stays within a safe range.

4. Replacing the Filter Element: According to the requirements of the operating manual, properly remove the old filter element and install the new lube filter 2-5685-0484-99.

5. System Restoration: After the replacement is complete, follow the operating procedures to restore the system and perform necessary tests to ensure the system operates normally after the filter element replacement.

By taking these measures, the lube filter 2-5685-0484-99 can be kept in good working condition, thereby ensuring the efficient and reliable operation of the feedwater pump steam turbine.