page_banner

AST solenoid valve coil Z6206052

Short Description:

The solenoid valve coil Z6206052 is a plug-in type and is used in conjunction with the valve core. Thread connected oil manifold blocks play a corresponding role. Used for emergency trip systems of steam turbines, where the trip parameters of the turbine control the closure of the inlet valve or speed control valve.


Product Detail

The power supply for the AST solenoid valve coil Z6206052 is 110VAC. In normal operation, the AST solenoid valve is energized to close the oil discharge channel on the AST main pipe, thereby establishing oil pressure in the lower chamber of all actuator pistons. When the solenoid valve loses power, the AST main pipe drains oil, causing all valves to close and causing the steam turbine to shut down.

Product Features

1. The solenoid valve coil is compact, flexible, and lightweight;

2. The solenoid valve coil is easy to install and maintain

3. The solenoid valve coil has a wide range of applications and a long service life

Maintain

During the process of replacing spare parts for the maintenance unit, it is important to pay attention to the correct installation of the AST solenoid valve coil Z6206052 powered by DC, and remember not to connect the DC and AC incorrectly. The burning phenomenon of the DC solenoid valve coil is often caused by the low discharge resistance during power outage. If the discharge resistance is too small, the coil current decays slowly, and the induced electromotive force is high during power outage, it may also cause the coil to overheat and burn out. During maintenance, attention should be paid to the wiring and replacement process to avoid unnecessary damage.

AST solenoid valve coil Z6206052 Show

AST solenoid valve coil Z6206052 (4) AST solenoid valve coil Z6206052 (3) AST solenoid valve coil Z6206052 (2) AST solenoid valve coil Z6206052 (1)


  • Previous:
  • Next:

  • Write your message here and send it to us