Characteristic
The main function of generator end cap sealing Sealant SWG-1 is to form a sealing layer between the generator end cap and the casing to prevent hydrogen leakage. During the operation of the generator, under high temperature and high pressure environments, chemical reactions may occur between the windings and insulation materials inside the generator, producing hydrogen gas. If hydrogen leaks outside the casing, it will cause serious harm to the environment and equipment.
The generator end cap sealing Sealant SWG-1 has a low density and is not affected by water, oil, gasoline, glycerol, steam, gas vapor, or exhaust gas, maintaining a viscous state at all times. Withstand extreme temperatures, will not harden, maintains effective sealing, shockproof, and is easy to disassemble and adjust during maintenance. Prevent corrosion and "freezing" with metal parts, and seal without temperature influence.
Usage
1. Before using sealant SWG-1, use sandcloth to remove the rust from the sealing joint surface on both sides, clean the end cap, and store dry.
2. Remove burrs from the bonding surface.
3. Dip a cotton cloth with a little acetone to remove oil stains. To be bonded.
Precautions
1. When using generator end cap sealing Sealant SWG-1, necessary labor protection equipment such as rubber gloves and masks should be worn.
2. Do not allow sealant SWG-1 to come into direct contact with eyes, skin, etc.
3. When using sealant SWG-1, the site should be well ventilated and no fireworks are allowed.
4. Shelf life: Storage period at room temperature is 24 months.
Generator end cap sealing Sealant SWG-1 Show
