-
Hydraulic oil system filter element FAX 250*10
The hydraulic oil system filter element FAX 250*10 is used for RFA miniature direct return oil filters. This filter element is used for fine filtration of return oil in hydraulic systems, filtering out metal particles generated by the wear of various components in the system and rubber impurities in seals, keeping the oil in the tank clean.
Brand: YOYIK -
generator stator cooling water filter element KLS-125T/20
The generator stator cooling water filter element KLS-125T/20 is used to filter impurities in the generator stator cooling water system. The stator cooling water system can continuously flow the cooling water (pure water) through the stator coil, so as to take away the heat caused by the loss of the generator stator coil, so as to ensure that the temperature rise (temperature) of the stator coil meets the relevant requirements of the generator operation. In order to ensure the cleanness of the cooling water pipe and prevent blockage, the generator stator cooling water filter element KLS-125T/20 is usually used to filter water to ensure clean water quality. -
Industrial water filter KLS-100I plant Stator cooling water system filter element
The main function of stator cooling water filter element KLS-100I is to filter impurities and pollutants in stator cooling water and protect the normal operation of stator and cooling system. In equipment such as generators, the stator is an important component, and its cooling water needs to be filtered through a filter element to ensure that impurities such as particles, sand, and rust in the cooling water do not cause damage to the stator, and can also extend the service life of the stator cooling system.
Brand: YOYIK -
Generator stator cooling water filter SGLQ-1000A
The generator stator cooling water filter SGLQ-1000A is installed inside the filter. The liquid flowing into the filter from the inlet is adsorbed on the surface of the filter element through vertically arranged melt blown filter elements. Clean liquid flows out of the internal space of the filter element and then flows into the system from the outlet of the filter, ensuring the cleanliness of the system fluid.
Brand: YOYIK -
Generator stator cooling water filter SGLQ-300A
The generator stator cooling water filter SGLQ-300A is used for filtering the cooling water system of generators. This filter element can effectively control the cleanliness level of the cooling water system and protect the system from being reused. Although the generator stator cooling water filter SGLQ-300A is not directly used in the generator cooling water system and needs to be installed on the SLQ-100 filter, the stator cooling water filter SGLQ-300A is the core filtration part of the water filter SLQ-100. Therefore, the generator stator cooling water filter SGLQ-300A is a key part of the filtration of the generator cooling water system.
Brand: YOYIK -
Generator stator cooling water filter SGLQB-1000
The generator stator cooling water filter SGLQB-1000 is installed in the makeup water filter to filter out impurities in the water. The water replenishment system filter has the advantages of simple structure, small volume, convenient cleaning, easy maintenance and installation, and easy and convenient replacement of filter elements. It is suitable for installation on pipelines to remove large solid impurities in the fluid.
Brand: YOYIK -
Generator stator cooling water filter WFF-150-1
The generator stator cooling water filter WFF-150-1 is dedicated to the stator cooling water system in the hydrogen oil-water system of a steam turbine generator. This is a type of wound filter element. Based on testing and practical application data, WFF-150-1 has outstanding performance in various aspects, especially in terms of flow rate, dirt retention capacity, and durability.
Brand: YOYIK -
Polyester sleeve fiberglass Rope
Polyester sleeve fiberglass Rope is mainly used for fixing the winding and also for insulation and protection of the winding. Polyester sleeve fiberglass Rope is suitable for fixing and binding the end of generator stator winding, used with dipping two components insulating adhesive. -
HSN series three-screw pump
HSN series three-screw pump is kind of displacement type low pressure rotor pump with favorable suction capacity. It is applicable to convey various liquid mediums which have lubricating property and do not contain impurities like solid particles, including fuel oil, hydraulic oil, machine oil, steam turbine oil and heavy oil. Viscosity scope of 3~760 mmP2P/s, conveying pressure ≤4.0Mpa, medium temperature ≤150℃. -
Main sealing oil pump HSND280-46N
Main sealing oil pump HSND280-46N is a vertical installation oil pump with side inlet and side outlet. It is sealed with a skeleton oil seal and is mainly configured in the sealing oil system. After being pressurized by the main sealing oil pump, it is filtered through a filter screen, and then adjusted to a suitable pressure by a differential pressure regulating valve to enter the generator sealing pad. The return oil on the air side enters the air separation box, while the return oil on the hydrogen side enters the sealing oil return box and then flows into the float oil tank, and then relies on the pressure difference to flow into the air separation box. The unit is generally equipped with one for operation and the other for backup, both driven by AC motors. -
DC Vertical lubricating oil pump 125LY-23-4
DC Vertical lubricating oil pump 125LY-23-4 is used to transport turbine oil and various fluid lubricating oils with lubricating functions. It is mainly composed of machine base, bearing chamber, connecting pipe, volute, shaft, impeller, and other components. Before assembling the oil pump, burring and repeatedly clean all parts and components, and confirm that the cleanliness meets the requirements before assembling. It is suitable for supplying normal temperature turbine oil to lubricating systems such as 15-1000MW steam turbine generator units, gas turbine generator units, and power turbines. -
Gear Oil Pump GPA2-16-E-20-R6.3
Gear oil pump GPA2-16-E-20-R6.3 is a common hydraulic pump, which is widely used in the hydraulic system. Its main function is to suck hydraulic oil from the oil tank and deliver pressure to the hydraulic system, so as to realize the power source of the hydraulic system.
/
