/
English
page_banner

News

  • Can Six-Wire LVDT Sensor HL-6-200-15 Replaced By Three-Wire LVDT?

    The HL type displacement sensor has two types of leads, six wire and three wire. Users can choose which type of lead to use according to the requirements of the control system design. Of course, the wiring method can be changed. Take the LVDT sensor HL-6-200-15 as example, which is a six wire ty...
    Read more

  • Introducing Structure of LVDT Position Sensor C9231124

    The structure of LVDT position sensor C9231124 is divided into the following parts: shell, inner tube, coil, front and rear end covers, circuit board, shielding layer, outgoing line, etc. The shell of displacement sensor C9231124 is made of stainless steel, which can shield against electromagnet...
    Read more

  • A Featured Type of Power Transformer: DFFG-10KVA

    The power transformer DFFG-10KVA is an energy-saving product with broad application prospects in power systems. It has the advantages of lower load loss, lower no-load loss, lower no-load current, low noise, and less high-order harmonic content. Adopting a special structure and optimizing the ove...
    Read more

  • Application Advantage of HTD-400-3 LVDT Position Sensor

    The position of the opening of each main steam valve, main regulating valve, and other valves in the steam turbine unit needs to be fed back to the control system in real time, in order to achieve automatic control and regulation of the steam turbine. The commonly used displacement sensors for va...
    Read more

  • Significance of Boiler Gap Measuring Device Power Supply GJCD-16

    The problem of air preheater leakage has always been one of the main factors that troubles the normal operation of power plants and reduces efficiency. Yoyik provides a dedicated power supply for gap control systems, the GJCD-16 model. It adopts a high-performance PLC combined with an industrial ...
    Read more

  • Significance of HTD-400-6 Actuator Displacement Sensor for Steam Turbine

    The stroke of the actuator represents the displacement generated by the piston of the actuator from fully open to fully closed in the oil cylinder. One of the main purposes of displacement sensor HTD-400-6 is to measure the stroke of turbine oil motor, which is an important part of the electro-hy...
    Read more

  • How Does LVDT Sensor HL-3-300-15 Control Valve Opening?

    The HL-3-300-15 LVDT position sensor for steam turbine is used in the DEH control system, mainly for stable and fast control of the actuator or valve opening. Yoyik introduces how the DEH system utilizes the LVDT displacement sensors to achieve this goal. When the main steam valve needs to be op...
    Read more

  • Common Fault of CPU Mainboard PCA-6740 for Industrial Computer

    The PCA-6740 CPU CARD is used on industrial control computers. In order to ensure the stability and reliability of industrial control computers, it is necessary to carefully read the user manual and follow the instructions for correct operation when installing and connecting the motherboard to en...
    Read more

  • Wiring the Six Terminals of RTD Temperature Sensor WZP2-221

    The thermal resistance RTD WZP2-221 is a temperature sensor designed for industrial users. It has dual temperature sensing elements with high temperature measurement accuracy. Usually used in conjunction with temperature transmitters, regulators, and thermometers to form a process control system....
    Read more

  • A Special Cable GJCL-15 Used for Boiler APH Gap Sensor

    The GJCL-15 cable is specially designed for the gap measurement device of boiler air preheaters. When the rotary air preheater operates, the rotor will experience uneven expansion due to heating, causing a gap between the radial sealing plate and the fan-shaped plate. This will cause a large amou...
    Read more

  • Advantages of Input Liquid Level Meter MIK-P261/400-0651-315

    The input type liquid level transmitter MIK-P261/400-0651-315 is composed of three parts: a fully sealed isolation membrane oil filled liquid level sensor, cables, and a display head. Its working principle is to achieve liquid level by measuring the static pressure of the liquid, converting the m...
    Read more

  • Features of JM-B-T010-562D2 Integrated Vibration Temperature Transmitter

    The integrated vibration transmitter JM-B-T010-562D2 is a small integrated, independent two wire, probe type transmitter. Its two 4-20mA output signals are respectively proportional to the true effective value (intensity) of the measured object’s vibration velocity and the temperature chang...
    Read more
<< < Previous 141142143144145146147 Next > >> Page 144 / 159
Hit enter to search or ESC to close