Rubber Strip Round CE Certification, Pricelist
I source Rubber Strip Round that reliably seals and cushions in harsh industrial environments. These round rubber strips are flexible, wear-resistant, and easy to install, perfect for gaskets, edge sealing, and vibration damping. I can provide CE Certification documentation to prove compliance with European standards, helping your QA team speed up approvals. We offer a clear Pricelist and fast quotation so you know your costs upfront, with options for different hardness, profiles, and lengths. If you need customization, we can cut, compound, or extrude to your specs. Our supply chain keeps consistent quality, on-time delivery, and competitive pricing for high-volume orders. For buyers evaluating long-term partners, I invite you to view samples, request certificates, and compare our Pricelist against your current suppliers. Let me know your target quantity and the environmental conditions, and I’ll tailor a Rubber Strip Round solution that meets your exact needs.
Rubber Strip Round Pioneers in the Field From Concept to Delivery
From concept to field-ready seals, round rubber strips are engineered for reliability in demanding environments. Buyers define performance: sealing pressure, compression set, and exposure. Material science translates that into a compound and geometry, then prototypes are cut, molded, or extruded. Rigorous testing—hardness, tensile strength, abrasion, chemical resistance, and thermal cycling—validates the design before tooling. The result is a seal tailored to the application, whether for automotive, industrial equipment, or electronics, with documentation to support sourcing decisions. Transitioning from pilot runs to mass production requires robust quality controls and transparent supply chains. On-time delivery hinges on scalable manufacturing, precise processes, and real-time monitoring. Buyers value traceability, conformity certificates, and consistent lots, along with packaging and logistics suitable for global shipping. A supplier focused on engineering rigor, long-term partnership, and proactive after-sales support helps mitigate risk and ensure a steady, cost-efficient supply of round rubber profiles from concept through delivery.
| Material | Common Diameter (mm) | Hardness (Shore A) | Temperature Range (°C) | Density (g/cm³) | Typical Applications | Manufacturing Method | Quality Standards |
|---|---|---|---|---|---|---|---|
| Neoprene (CR) | 2.0 – 40.0 | 50 – 70 | -40 to 120 | ≈1.23 | Weather seals, conveyor guides, outdoor gaskets; good ozone and moderate oil resistance. | Continuous extrusion; crosslinking (vulcanization) for final properties. | ISO 9001, ASTM D2000, REACH |
| EPDM | 3.0 – 50.0 | 40 – 80 | -50 to 150 | ≈1.12 | Weatherproof seals, automotive exterior trim, steam or hot water environments; excellent UV/ozone resistance. | Extrusion with post-vulcanization for consistent elastic performance. | ISO 9001, ASTM D2000, RoHS |
| Nitrile (NBR) | 2.5 – 30.0 | 40 – 90 | -30 to 120 | ≈1.23 | Oil and fuel handling seals, hydraulic wipers, industrial hose edge protection. | Extrusion followed by vulcanization; formulations tailored for oil swell control. | ISO 9001, ASTM D2000 |
| Silicone (VMQ) | 1.5 – 40.0 | 20 – 80 | -60 to 200 | ≈1.25 | High-temperature seals, medical-device components, food-contact (where specified), electrical insulation. | Low-shear extrusion; peroxide or platinum-cured vulcanization for high-purity grades. | ISO 9001, ASTM D2000, FDA (where applicable) |
| Natural Rubber (NR) | 2.0 – 35.0 | 30 – 90 | -40 to 70 | ≈0.95 | Vibration damping strips, resilient seals, general-purpose gaskets with excellent tensile properties. | Extrusion with sulfur vulcanization; often post-processing to improve surface finish. | ISO 9001, ASTM D2000 |
| Fluoroelastomer (FKM) | 1.5 – 25.0 | 60 – 90 | -20 to 200 | ≈1.78 | High chemical/oil/heat environments, aerospace seals, demanding industrial applications. | Controlled extrusion with specialized curing profiles to ensure chemical resistance. | ISO 9001, ASTM D2000 |
| Material | Surface Finish | Typical Tolerance (mm) | Recyclability (%) | Typical Batch Size (kg) | Lead Time (weeks) | Remarks |
|---|---|---|---|---|---|---|
| Neoprene (CR) | Smooth / Semi-matte | ±0.05 – ±0.25 (depends on Ø) | ≈40% | 500 – 2,000 | 2 – 5 | Balanced ozone and flame resistance; suitable for outdoor exposure. |
| EPDM | Matte, UV-stable | ±0.05 – ±0.30 | ≈60% | 500 – 3,000 | 2 – 6 | Excellent aging stability; common for weather seals and roof-edge applications. |
| Nitrile (NBR) | Smooth, oil-resistant coating options | ±0.04 – ±0.20 | ≈30% | 500 – 2,000 | 2 – 5 | Good resistance to fuels and oils; select formulations for low gas permeability. |
| Silicone (VMQ) | Silky-smooth to fine-textured | ±0.03 – ±0.18 | ≈20% | 100 – 1,000 | 1 – 4 | Very stable at extreme temperatures; food- and medical-grade options available. |
| Natural Rubber (NR) | Textured to smooth | ±0.05 – ±0.25 | ≈70% | 200 – 1,500 | 2 – 5 | Excellent resilience and tear strength; limited chemical resistance. |
| Fluoroelastomer (FKM) | Fine-smooth, high-precision | ±0.03 – ±0.12 | ≈15% | 200 – 800 | 3 – 6 | Premium performance in aggressive chemistries and high-temperature service. |
Related Products
Rubber Strip Round Factory Dominates
Top Selling Products
- Related Blog
- Reviews
